|
|
SENSIT®
HXG2d COMBUSTIBLE GAS LEAK DETECTOR WITH DIGITAL DISPLAY
Locate and quantify combustible gas leaks with this
state-of-the-art gas detector. This instrument provides PPM and LEL
readings. Preset alarms warn of hazardous gas accumulations. An all
new, patent pending, digital tick allows fast leak detection while
minimizing reactions to “interfering” gases such as leak detection
fluids and pipe joint compounds.
Key Benefits
- Low initial cost
- Low cost of ownership
- Alkaline or rechargeable versions
- Field calibrateable
- Digital tick control
Approvals (all pending)
ATEX, US and CSA
See brochure for details (documents available upon request)
Common Uses
- Monitor environments for combustible gases.
- Monitoring prior to entry and continuously during work in
confined spaces.
- Utility and propane service personnel, and emergency
responders use these to monitor or test levels of combustible gas leaks
during leak investigations.
- Utilities supplement other brands of gas detectors to find
gas leaks faster and easier.
- Oil and gas production personnel monitor work environments
and locate leaks for preventative maintenance and lowering their carbon
foot print from un-necessary releases of combustible gases.
- Fire departments use for combustible gas leak location.
- Fire departments use for locating the proximity of
accelerants used to set fires.
- Detection of virtually any combustible gas in the PPM range.
|
|
|
|
SENSIT®
HXG3 COMBUSTIBLE GAS LEAK DETECTOR AND EXPLOSIMETER
This
combustible gas detector has a precise tick rate control to assist
in locating those hard to find leaks, a digital display that reads both
concentrations of LEL and parts-per-million of the combustible gas
sensed. Warning LED's and audible alarms alert the operator of
impending hazards. A push button data-logging feature allows you to
print out the results of a gas leak test and calibration data to an
optional printer or PC.
Detection
of gas occurs at the
end of a flexible gooseneck allowing easy pinpointing of a leak source.
The sensor samples the air continuously using convection or through the
use of the optional internal sample pump. Accessory probes provide gas
samples to the sensor from remote locations or manholes.
Key
Benefits
- Instantaneous response
- 10 PPM sensitivity
- Easy one-hand operation
- Durable composite housing
- Low maintenance cost
- UL and ATEX Approved
Common
Uses
- Locate
above ground or exposed
piping leaks quickly. Identify and record leaks found and repaired for
download at a later date. Alarms warn of impending hazards from
combustible gas accumulations or major leaks.
- Locate
natural gas leaks at
power stations. Can be used to locate hydrogen leaks.
- Use
to help locate the
presence of flammable accelerants during arson investigations. Identify
the presence of hazards such as industrial solvents and fuels such as
gasoline, jet fuel and alcohols.
- Identify
the presence of combustible gases and provide
alarms per the telecommunication industry practices when entering
confined spaces.
|
|
|
|
SENSIT® GOLD VERSATILE MULTIPLE GAS DETECTION INSTRUMENTS
Leak detection and gas monitoring combined in a single
package. These instruments can be custom configured to meet your needs
when detecting combustible gases in the LEL range, locating combustible
gas leaks in the PPM range, measuring oxygen content, carbon monoxide
and/or hydrogen sulfide. All instruments are equipped with an internal
pump for constant sampling. Audible and visual alarms warn the operator
of hazardous conditions.
Key Benefits
- Fast leak detection
- Simultaneously view all gas concentrations
- Simple calibration
- Download operational and calibration data
- Lowest overall cost of operation
- UL and CSA Approved
Common Uses
- Locate leaks quickly on exposed and yard line piping. Ideal
as a first response tool for service department. Ideal as a confined
space tool when adding the necessary sensors such as CO and O2. Find
leaks quickly on gate stations and odorizers. Perform CO investigations
and test appliance flues. Calibration and operational data can be saved
for record keeping purposes.
- Locate leaks quickly on exposed and yard line piping. Ideal
as a first response tool for service department to find those hard to
find leaks. Ideal as a confined space tool when adding the necessary
sensors such as CO and O2 for inside tank inspections. Find leaks
quickly at tank farms, on bottles, regulators and underground tank
inspections. Perform CO investigations and test appliance flues.
Calibration and operational data can be saved for record keeping
purposes.
- Locate leaks quickly on exposed and yard line piping.
Perform CO investigations and test appliance flues. Operational data
can be saved for record keeping purposes.
- Locate leaks quickly on exposed and underground piping
systems, as the combustible gas sensor will detect many gases. Ideal as
a first response tool when determining a hazardous condition or to find
those hard to find natural gas or propane leaks. Ideal as a confined
space tool when adding the necessary sensors such as CO, H2S and/or O2.
Can also be used to qualify the use of some accelerants for arson
investigation.
- Locate leaks quickly on exposed and underground piping
systems as the combustible gas sensor will detect many gases. Ideal as
a first response tool for service department to find those hard to find
leaks. Ideal as a confined space tool when adding the necessary sensors
such as CO, H2S and/or O2.
- Ideal as a confined space tool when adding the necessary
sensors such as CO, H2S and/or O2 for inside manholes. Leak detector
assists in finding gas leaks at generating stations.
- Ideal as a confined space tool when adding the necessary
sensors such as CO, H2S and/or O2 for inside manholes. Leak detector
assists in finding the source of gas leaks that are traveling down
cable ducts.
|
|
|
SENSIT® GOLD 100
VERSATILE MULTIPLE GAS DETECTION INSTRUMENTS
Reads 100% gas by volume for Methane and Propane.
Leak detection and gas monitoring combined in a single
package. These instruments can be custom configured to meet your needs
when detecting combustible gases in the LEL and percent volume range,
locating combustible gas leaks in the PPM range, measuring oxygen
content, carbon monoxide and/or hydrogen sulfide. All instruments are
equipped with an internal pump for constant sampling. Audible and
visual alarms warn the operator of hazardous conditions.
Key Benefits
- Fast leak detection
- Simultaneously view all gas concentrations
- Simple calibration
- Download operational and calibration data
- Lowest overall cost of operation
- UL and CSA Approved
Common Uses
- Locate leaks quickly on exposed and yard line piping. Ideal
as a first response tool for service department. Ideal as a confined
space tool when adding the necessary sensors such as CO and O2. Find
leaks quickly on gate stations and odorizers. Perform CO investigations
and test appliance flues. Calibration and operational data can be saved
for record keeping purposes.
- Locate leaks quickly on exposed and yard line piping. Ideal
as a first response tool for service department to find those hard to
find leaks. Ideal as a confined space tool when adding the necessary
sensors such as CO and O2 for inside tank inspections. Find leaks
quickly at tank farms, on bottles, regulators and underground tank
inspections. Perform CO investigations and test appliance flues.
Calibration and operational data can be saved for record keeping
purposes.
- Locate leaks quickly on exposed and yard line piping.
Perform CO investigations and test appliance flues. Operational data
can be saved for record keeping purposes.
- Locate leaks quickly on exposed and underground piping
systems, as the combustible gas sensor will detect many gases. Ideal as
a first response tool when determining a hazardous condition or to find
those hard to find natural gas or propane leaks. Ideal as a confined
space tool when adding the necessary sensors such as CO, H2S and/or O2.
Can also be used to qualify the use of some accelerants for arson
investigation.
- Locate leaks quickly on exposed and underground piping
systems as the combustible gas sensor will detect many gases. Ideal as
a first response tool for service department to find those hard to find
leaks. Ideal as a confined space tool when adding the necessary sensors
such as CO, H2S and/or O2.
- Ideal as a confined space tool when adding the necessary
sensors such as CO, H2S and/or O2 for inside manholes. Leak detector
assists in finding gas leaks at generating stations.
- Ideal as a confined space tool when adding the necessary
sensors such as CO, H2S and/or O2 for inside manholes. Leak detector
assists in finding the source of gas leaks that are traveling down
cable ducts.
|
|
 |
GAS-TRAC® NGX-6
COMBUSTIBLE GAS DETECTOR
Features a highly sensitive
sensor to locate gas leaks quickly and precise tick rate control to
pinpoint them fast. The GAS-TRAC®'s unique design features solid state
electronics, automatic zeroing and calibrated LEDs to indicate gas
concentrations.
Key Benefits
- 100% solid state/low maintenance
- Battery saver circuitry with auto shutoff
- Durable case with reinforced stress points
- LEL warning lights
- Loud, variable tick rate warning system
- 10 ppm sensitivity
- FM Approved, not
ATEX
Common Uses
- Locate inside and outside gas leaks easily. Calibrated
alarm warns of potential hazardous gas build up.
- Locate gas leaks on gas fired power stations.
- Identify the presence of hazardous material such as
gasoline, industrial emissions or spills. Identify suspected areas of
accelerant usage.
- Warn of combustible gas build-ups in confined spaces.
Gas-Trac® is a registered trademark of Northern
Illinois Gas
Company (now Nicor Gas).
|
|
|
|
SENSIT®
P100
Personal gas monitor for CO, HCN, Cl2, SO2, NO, NO2,
O2 or H2S
Protect personnel from, unsafe oxygen concentrations, and
toxic gases such as carbon monoxide, hydrogen cyanide, sulfur dioxide,
chlorine, nitrous oxide, nitrogen dioxide or hydrogen sulfide. The
extremely durable Sensit P100 will provide audible, visual and
vibration alarms when any of the preset limits are exceeded. The preset
operational life at 24 months provides an easy reminder to have the
sensor and battery serviced.
Key Benefits
- Low initial cost
- Low cost of ownership
- Event log of 100 alarms
- Field calibrateable
- Virtually water proof
Approvals
ATEX, US and CSA
See brochure for details (documents available upon request)
Application notes:
- Monitor environments for hydrogen sulfide and carbon
monoxide gases as well as oxygen deficiency.
- Monitoring prior to entry and continuously during work in
confined spaces.
- Utility and propane service personnel, and emergency
responders use these to monitor or test levels of toxic gases such as
carbon monoxide during investigations.
- Utilities may monitor areas around “live” gas operations to
alert workers of potential oxygen deficient conditions.
- Oil and gas production personnel monitor work environments
from H2S releases.
- Propane operators will use these to monitor the air prior
to entering large tanks for maintenance.
|
|
|
|
CALIBRATION
KIT
Keep your gas
detection instruments operating safely and accurately.
We stock a
variety of calibration kits to service the instruments we offer. The
gas in each kit will be different depending on the type of product.
Please use our feedback form to request information for a calibration
kit for your particular product. Be sure to tell us what product you
need to calibrate.
CALIBRATION IS
IMPORTANT. Your life may depend on it! All gas detectors should be
calibrated on a periodic basis to insure the proper operation and
accuracy of the product. Instruments that are not working properly
could be a danger to you and your customers.
Calibration
kits are used to verify and set an instrument to a known sample of gas.
Calibration is not just making sure the instrument reads zero at turn
on. When calibrating, you are adjusting the sensor output to equal the
display reading as well as verifying the performance of the product.
This should be documented and performed per your company requirements
or monthly.
Quick check
kits are available that provide a simple and inexpensive way to test
instrument function. Testing function will at least protect you and
your customers. However to maintain accuracy if you frequently test for
function, such as daily or weekly, calibration should be performed no
less than once a year.
|
|
